CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

number of nodes on an edge in ICEM CFD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 13, 2006, 13:26
Default number of nodes on an edge in ICEM CFD
  #1
strider
Guest
 
Posts: n/a
I wonder if anyone have had this probem before :

I can't put more than 1000 nodes on an edge in «edge parameters». When I put 1001, the refined geometry disapears. At first, I thaught it was just a display problem and that the mesh existed without being displayed. But the exportation to CFX had the same problem, the part just disapeared. Now, is there a number of nodes limit somewhere that I could level up.

Thanks a lot!
  Reply With Quote

Old   July 14, 2006, 02:24
Default Re: number of nodes on an edge in ICEM CFD
  #2
Patrick
Guest
 
Posts: n/a
I had the same problem and there is no way to level up this number. You have to divide your geometry into several blocks. As far as I remember you should be able to set 1000 nodes per block-edge. Anyway: have you installed all SP1? It's possible that this bug is fixed in the meantime.
  Reply With Quote

Old   July 24, 2006, 16:31
Default Re: number of nodes on an edge in ICEM CFD
  #3
strider
Guest
 
Posts: n/a
Thank you Patrick, indeed I had to split the edge.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import Mesh from ICEM CFD to CFX Andre Almeida CFX 16 April 19, 2016 04:42
Importing Solidworks part into ICEM CFD MetalSupremacist FLUENT 0 October 8, 2010 18:46
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
ICEM CFD Modules Boris FLUENT 1 March 12, 2004 15:37


All times are GMT -4. The time now is 07:19.