Issue with STL file in Flow3D

July 24, 2006, 10:14

Anyone with flow3d experience...

I'm having problems with STL files in Flow 3D. After meshing and setting up the case, when I try to compile the case, I have the following error ****************************************** level 1 error in subroutine rdstl: i/o error while opening stl data file ******************************************

Can anyone help me???

July 24, 2006, 12:53

with version 8.n.m, the STL should reside in the project directory and have no spaces (use underlines only). Standard WIN long file names are not allowed

July 24, 2006, 10:14	Issue with STL file in Flow3D	#1
Rajiv Kothari Guest Posts: n/a	Anyone with flow3d experience... I'm having problems with STL files in Flow 3D. After meshing and setting up the case, when I try to compile the case, I have the following error **************************************** level 1 error in subroutine rdstl: i/o error while opening stl data file **************************************** Can anyone help me???

July 24, 2006, 12:53	Re: Issue with STL file in Flow3D	#2
anonymous Guest Posts: n/a	with version 8.n.m, the STL should reside in the project directory and have no spaces (use underlines only). Standard WIN long file names are not allowed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2.0.x on Mac OSX	niklas	OpenFOAM Installation on Windows, Mac and other Unsupported Platforms	74	March 28, 2012 16:46
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3	flakid	OpenFOAM Installation	16	December 28, 2010 08:48
1.7.x Environment Variables on Linux 10.04	rasma	OpenFOAM Installation	9	July 30, 2010 04:43
Compiling gmshFoam with OpenFOAM-1.5	BlGene	OpenFOAM Open Source Meshers: Gmsh, Netgen, CGNS, ...	10	August 6, 2009 04:26
Results saving in CFD	hawk	Main CFD Forum	16	July 21, 2005 20:51