IC Engine analysis

brightfame3 · July 21, 2013, 12:40

Hello! I hope I am posting this in the correct location. I would really thank a little bit of help, since I have been having some difficulties in this matter.

I intend to do a CFD analysis of an IC Engine for my masters thesis. I have two big doubts about the construction of the model:

1) I intend to create the model in CATIA, mesh it in Pointwise and analyze it in Fluent. Of my knowledge, Fluent can recognize a solid body as a fluid. Therefore, should i construct the model as a solid, or is there another way more recomendable?

2) My other question is the valves. Also, how should I introduce the valves in the body? Create a diferent part, or should i create it within the same body as the cylinder?

Thank you for your time!

taxalian · July 22, 2013, 16:15

Quote:

Originally Posted by brightfame3

Hello! I hope I am posting this in the correct location. I would really thank a little bit of help, since I have been having some difficulties in this matter.

I intend to do a CFD analysis of an IC Engine for my masters thesis. I have two big doubts about the construction of the model:

1) I intend to create the model in CATIA, mesh it in Pointwise and analyze it in Fluent. Of my knowledge, Fluent can recognize a solid body as a fluid. Therefore, should i construct the model as a solid, or is there another way more recomendable?

2) My other question is the valves. Also, how should I introduce the valves in the body? Create a diferent part, or should i create it within the same body as the cylinder?

Thank you for your time!

Hi, i think you just need to export the surface model as an IGES and then import it into Pointwise. Well i would also construct the valves as surface features in CATIA within the same body as the cylinder.

Hope this helps.

brightfame3 · July 22, 2013, 16:18

Hi! Thank you for your answer! So you mean I should use the surface design and not the part design correct? I will give it a try and then give you some feedback! Thank you very much!

brightfame3 · July 22, 2013, 16:23

I forgot to ask something.. I am drawing just half of the cylinder. Do i need to put a surface on the symmetric face? Thank you for your time!

July 21, 2013, 12:40	IC Engine analysis	#1
brightfame3 New Member Robert Gonçalves Join Date: Jul 2013 Posts: 17 Rep Power: 12	Hello! I hope I am posting this in the correct location. I would really thank a little bit of help, since I have been having some difficulties in this matter. I intend to do a CFD analysis of an IC Engine for my masters thesis. I have two big doubts about the construction of the model: 1) I intend to create the model in CATIA, mesh it in Pointwise and analyze it in Fluent. Of my knowledge, Fluent can recognize a solid body as a fluid. Therefore, should i construct the model as a solid, or is there another way more recomendable? 2) My other question is the valves. Also, how should I introduce the valves in the body? Create a diferent part, or should i create it within the same body as the cylinder? Thank you for your time!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Combustion analysis of diesel engine	unsolver	Main CFD Forum	0	October 13, 2012 06:15
Need help for IC engine analysis in basic level	tsram90	FLUENT	0	November 3, 2011 06:57
ic engine in-cylinder gas flow analysis	george thomas	CFX	5	January 29, 2008 07:49
engine flow analysis to find torque	maurizio	CFX	8	August 13, 2007 02:07
Coolant flow analysis - IC engine	Frank	FLUENT	2	May 19, 2002 15:59

July 22, 2013, 16:18		#3
brightfame3 New Member Robert Gonçalves Join Date: Jul 2013 Posts: 17 Rep Power: 12	Hi! Thank you for your answer! So you mean I should use the surface design and not the part design correct? I will give it a try and then give you some feedback! Thank you very much!

July 22, 2013, 16:23		#4
brightfame3 New Member Robert Gonçalves Join Date: Jul 2013 Posts: 17 Rep Power: 12	I forgot to ask something.. I am drawing just half of the cylinder. Do i need to put a surface on the symmetric face? Thank you for your time!