CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Mesh generator for marine propellers

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 1, 2006, 11:35
Default Mesh generator for marine propellers
  #1
clhona
Guest
 
Posts: n/a
Hi everybody, I'm gathering infos about mesh generator for meshing marine propellers in hexahedral : has anyone experience in this field ? If so, wich generator do you use ? Thanx
  Reply With Quote

Old   September 1, 2006, 12:01
Default Re: Mesh generator for marine propellers
  #2
ubik
Guest
 
Posts: n/a
I wrote a fortran code to mesh marine propellers. it is a little bit tricky to use, but works most of the time. it generates an hexa mesh to feed Comet. I can give you more informations

ubik

  Reply With Quote

Old   September 1, 2006, 12:47
Default Re: Mesh generator for marine propellers
  #3
Jörn Beilke
Guest
 
Posts: n/a
http://www.gridpro.com/gridgallery/fan.html
  Reply With Quote

Old   September 3, 2006, 11:02
Default Re: Mesh generator for marine propellers
  #4
clo
Guest
 
Posts: n/a
ubik I d be glad to have other infos...Thank you!
  Reply With Quote

Old   September 4, 2006, 04:38
Default Re: Mesh generator for marine propellers
  #5
ubik
Guest
 
Posts: n/a
it works quite well for conventional propellers with not extreme skew. the geometrical input is a file with xyz face and back coordinates for a large enough number of spanwise sections. the hub is cylindrical with a taper to the shaft. the mesh is done inside a cylindrical domain of prescribed dimensions. it is automatic in the sense that you can play only with a number of parameters do define stretching, cell number, dimension of the domain.... no cad at all inside. I can send you some image if you want ubik

  Reply With Quote

Old   September 4, 2006, 07:31
Default Re: Mesh generator for marine propellers
  #6
clhona
Guest
 
Posts: n/a
I understand...the proble is tha t I need something more general (about the skew and CAD). Thanx anyway
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[snappyHexMesh] Number of cells in mesh don't match with size of cellLevel colinB OpenFOAM Meshing & Mesh Conversion 14 December 12, 2018 09:07
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 05:24
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 14:40
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10


All times are GMT -4. The time now is 09:19.