CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Multiphase System

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 22, 2013, 06:27
Default Multiphase System
  #1
New Member
 
Francesco
Join Date: Mar 2013
Posts: 7
Rep Power: 13
frenk_8 is on a distinguished road
Hi,

I'm a new CFD user and I'm trying to simulate a CSTR with a solid. I divide the volume in different part to mesh them in the most regular way.

I set the standard k-e model, standard wall fn, dispersed and I use the multiphase eulerian model.

I set water and send as fluid. Water the primary phase and Sand as secondary and with the gidaspow drag coefficient.

in the cell zone condition I set all the part with a mixture as phase except the part with the blade in which I set frame motion.

I run the simulation and it seems that there's no solid inside the system. Where should I set the solid fraction in the system?

thank you in advance
frenk_8 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX11 + Fortran compiler ? Mohan CFX 20 March 30, 2011 19:56
outflow BC for multiphase system Kushagra FLUENT 0 June 27, 2008 15:40
multiphase system, segmentation violation error Kerem FLUENT 1 April 3, 2006 06:42
Multiphase multicomponent system David CFX 0 January 15, 2004 21:59
How to avoid Divergence of multiphase (gas/liquid system) in Fluent :??? mounir Main CFD Forum 1 September 1, 1999 17:30


All times are GMT -4. The time now is 17:42.