CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   boundary condition (http://www.cfd-online.com/Forums/main/122967-boundary-condition.html)

adnancfd September 2, 2013 02:07

boundary condition
 
hi Guys:
i have question about boundary condition at the exit flow pipe on Gambit?
what is the difference between pressure outlet and outflow? TQ

RameshK September 2, 2013 13:39

As I understood about outlet and outflow is based on what kind of flow you are looking at , internal flow or external flow. If internal flow it is outlet condition, for external flow it is out flow condition.

Correct me if I am wrong.

Thank you

Aeronautics El. K. September 2, 2013 16:37

When you set pressure outlet boundary condition, the flowfield is determined by the pressure difference between the inlet and the outlet.
When you set outflow boundary condition, the variables are extrapolated to the boundary from the interior nodes and you have zero gradient at the boundary


All times are GMT -4. The time now is 21:19.