CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Peric Book - Comet Software (http://www.cfd-online.com/Forums/main/12360-peric-book-comet-software.html)

nags October 4, 2006 09:39

Peric Book - Comet Software
 
Got a hold of Peric's book. Appendix in the back includes a web page to download example code which I got.

The COMET software however is no longer available online.

Questions: 1) is COMET still available, i.e., free but limited in its capabilites? 2) If not, is there a direct replacement available? 3) Could someone direct me to a location where I could get a copy of COMET or its replacement? 4) Should I forget about COMET and use another code that will allow me to learn CFD using Peric's book?

prapanj October 4, 2006 23:57

Re: Peric Book - Comet Software
 
hey dude i have got the PERIC codes. send me ur email . i will send them to u. i got them from my friend. I will send it to u in two days. is that enough?


William Blake October 5, 2006 00:27

Re: Peric Book - Comet Software
 
Comet is probably still available if you ask for it (www.cd-adapco.com).

Prof. Peric is now head of the solver-developement at CD-adapco and Comet and StarCD (v3) were merged into Star4.

sarah_ron October 5, 2006 16:46

Re: Peric Book - Comet Software
 
Hi,dear prapanj

could you do me a favor to send it to me ?

sarah_ron2002@yahoo.com

thanks a lot!

sarah

cfd user October 6, 2006 08:12

Re: Peric Book - Comet Software
 
me also

amicatlll@hotmail.com

Many thanks

cfd user October 6, 2006 08:13

Re: Peric Book - Comet Software
 
me also

amicatlll@hotmail.com

many thanks


John October 6, 2006 11:40

Re: Peric Book - Comet Software
 
Are you sure you have source code for COMET because it was a commercial software before CD-Adapco bought it?

Ahmed October 6, 2006 18:20

Re: Peric Book - Comet Software
 
It has never been. I got Peric's Book two years ago, I tried through the poblisher to contact the author, but failed. You can download the StarCMM instead from the CD Adapco web site, as has been posted, the COMET has been bought by CD Adapco and the technology behind COMET is included in the new product. Good Luck

aiya October 7, 2006 09:13

Re: Peric Book - Comet Software
 
Can give me one copy ? Thanks! mud2003@126.com

George October 8, 2006 17:34

Re: Peric Book - Comet Software
 
I would appreciate one more copy for me. My e-mail is gismolas@yahoo.gr

Thank you!

zxaar October 8, 2006 18:10

Re: Peric Book - Comet Software
 
I am not sure about comet but, perics codes are here:

ftp://ftp.springer.de/pub/technik/peric/

sandeep October 10, 2006 04:52

Re: Peric Book - Comet Software
 
i would be so thankful if u could send a copy to this id too...

sandeepvarmars@gmail.com

thank u

Beginner October 16, 2006 19:57

Re: Peric Book - Comet Software
 
I can't access ftp, and I don't know what the matter...

Anyway, hope someone can send me a copy of all codes :) And big thanx in advance.

me.ella@hotmail.com


Hurricane October 19, 2006 07:46

Re: Peric Book - Comet Software
 
Find it in you mailbox

CFDtoy October 20, 2006 15:44

Re: Peric Book - Comet Software
 
Could you send me a copy too..

Thanks

CFDtoy

Javed August 17, 2010 23:59

Could u plz send me the codes on sk1.javed@gmail.com

Thanks in advance
Javed

luisminchola September 13, 2010 14:16

Comet
 
Please could you send me Comet program. email: luisminchola@gmail.com.
Thanks

mahsa September 13, 2010 14:40

Could u plz send me the codes too
I would be so thankfull
m.nazaripour@gmail.com

i2a March 16, 2012 04:35

I am sorry, as this is my second post on the same topic today...

somebody plz send the codes at

computational.fluids@gmail.com

Thanks a lot

adampaya September 14, 2012 14:15

How to run the peric's code
 
Hello everyone
I have some challenge in using the peric code
For example consider 2DGL, when I generate the gird for the geometry, what's the next step??? Should I use the Caffa.f or user.f ????
I read the read me file, but I don't understand.:mad:

Thanks for your help.


All times are GMT -4. The time now is 00:18.