Level Set in Cavitation Modeling
 

While looking for experience on level set function usage in cavitation modeling, I've found papers on rising bubbles and other free surfaces captured by a level set function, but -seemingly- few on cavitation bubble dynamics. The latter adding some complications such as bubble creation (inception), merging, rapid changes of bubble volume and the eventual bubble collapse.

I would be grateful for tips and references on the subject.

Niklas.

Re: Level Set in Cavitation Modeling
 

FOAM CONTROL USING A FLUIDIZED BED

Principal Investigator

Daniel D. Joseph

Research Team

Jose Guitian

Clara Mata

Ling Jiang

Supporters

National Science Foundation - GOALI Grant

INTEVEP S. A.

DOE

Applications of foams and foaming are found in many industries like the flotation of minerals, enhanced oil recovery, drilling in oil reservoirs, insulation, construction and refining processes such as Vacuum distillation and Delay-Coker reactors. However, foaming and defoaming are not yet understood. Foams trap gas and are not wanted in many applications. Guitian and Joseph (1997) proposed fundamental studies of their observations on foam suppresion experiments they carried out in a cold slit bubble reactor. In this page we present our most recent findings.

The Project

Experimental Setup

Foaming Criterion

Foam Formation in a Bubble Column With a Good Distributor

Foam Control Using a Fluidized Bed of Particles

Publications

Joseph, D.D., "Questions in Fluid Mechanics: Understanding Foams and Foaming." Technical Forum. Journal of Fluids

Engineering, 119, 497-498 (1997).

Guitian, J. and D. Joseph, "How Bubbly Mixtures Foam and Foam Control Using a Fluidized Bed." To be published in

the International Journal of Multiphase Flow, 1997.

Mata, C. and D. Joseph, "Foam Control Using a Fluidized Bed of Hydrophobic Particles." To be published in the

International Journal of Multiphase Flow, 1997.

Web site designed and maintained by Kristen Alberts