|March 13, 2014, 05:41||
resonance acoustical vs. electrical
Join Date: Mar 2011
Posts: 12Rep Power: 7
i was modelling pressure wave propagation in compressible fluids using CFX and started with simple "one end closed pipe flows" of 1m lenght to figure out resonance frequencies.
To validate my numerical results or/and to setup the appropriate BC´s i was using simple fundamental equations.
I used 2 approaches to calculate the resonance frequency and find that there is a discrepancy of 1/2 pi.
1. "electrical resonance of LC-circuits"
=> omega = 1 / (L*C)^0,5
2. "wave equation of sinusoidal waves"
=> lambda = c / f
Only the second approach gives reasonable frequencies and the first was always 1/2pi to small.
Please take a look on the attached pdf.
best regards and thank you in advance .
|Thread||Thread Starter||Forum||Replies||Last Post|
|How to predict & verify resonance frequency of pipe by flow?||aerodigit||FLUENT||0||April 4, 2013 21:03|
|How to calculate electrical potential with UDS?||seagullor||FLUENT||2||July 5, 2012 02:04|
|Help with electrical conductivity in Fuel cells||Golnaz||FLUENT||3||June 17, 2011 16:21|
|How to add electrical conductivity in user defined||sangeeta||FLUENT||1||March 29, 2011 12:29|
|electrical breakdown simulation||Marcelo||Main CFD Forum||0||January 19, 2009 14:46|