CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Filtered navier stokes equation..LES::

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By cfdnewbie

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 14, 2007, 06:01
Default Filtered navier stokes equation..LES::
  #1
Palani Velladurai
Guest
 
Posts: n/a
hI ! FOR Large eddy simulation´,,,I have seen that , we r usin filtered navier stokes equation..Is the same one like Avaraged Navier stokes....or ????

reply me
  Reply With Quote

Old   March 14, 2007, 06:21
Default Re: Filtered navier stokes equation..LES::
  #2
john deas
Guest
 
Posts: n/a
Reynolds equations are time-averaged NS while LES are spatially filtered NS.
  Reply With Quote

Old   March 14, 2007, 08:03
Default Filtered navier stokes equation..LES::once again
  #3
Palani Velladurai
Guest
 
Posts: n/a
hello !!!

In Rynolds averaged navier stokes equation.....

we are having variables for example ...(Velicoty)

v = V(Time averaged) + v'( Fluctutating term)

this V (time averaged) values are obtained by takin average of all the values over time....

Similarly for Filtered equations we are applying spatial filters.....

what s the mathtematical idea behind that one???

  Reply With Quote

Old   March 14, 2007, 09:16
Default Re: Filtered navier stokes equation..LES::once aga
  #4
john deas
Guest
 
Posts: n/a
http://en.wikipedia.org/wiki/Large_eddy_simulation

I guess you average the velocity on each computational cell and that leads you to introduce a new term. For Reynolds-averaged NS your new term will be Reynolds stress, and for LES it will be eddy viscosity. Then you will link this eddy viscosity to the averaged velocity components in some new equation. OK... as you can read I can not go much more beyond this basic description of LES, sorry.
  Reply With Quote

Old   December 1, 2010, 05:47
Default
  #5
New Member
 
tushar
Join Date: Aug 2010
Posts: 9
Rep Power: 15
tushar is on a distinguished road
I m also trying to understand same problem.. i guessed smthing like below
filtering on u = u(filtered)
but filtering on u*u != u(filtered)*u(filtered)

i dont know whether it is right or wrong.. comments please
tushar is offline   Reply With Quote

Old   September 15, 2011, 13:52
Default Reylnolds averaging
  #6
New Member
 
Asya Skal
Join Date: Sep 2011
Posts: 5
Rep Power: 14
asyaskal is on a distinguished road
Hello
I have solved NS equation in serial of six papers by spatial averaging enstead of velosity, as did Reynolds.
Read my first one in

Journal of Engineering and Technology Research; June 2011; 3(6)


www.academicjournals.org/jetr/contents/2011cont/Jun.htm - Cached
You +1'd this publicly. Undo
Asya S. Skal. Does a physically reasonable solution of the Navier Stokes equations. exist? [Abstract] [Full Text] [Full Article - PDF] pp. 168-170 ...
asyaskal is offline   Reply With Quote

Old   September 15, 2011, 19:07
Default
  #7
Senior Member
 
cfdnewbie
Join Date: Mar 2010
Posts: 557
Rep Power: 20
cfdnewbie is on a distinguished road
I must admit I have a hard time understanding why this paper was accepted... I have never heard of this journal as well.... Am I just being ignorant, or is this fishy?

I think digging up old threads to plug one's papers is not the most helpful approach either..
nikola_m likes this.
cfdnewbie is offline   Reply With Quote

Old   September 6, 2013, 03:51
Default Filtered navier stokes equation..LES and Stress
  #8
New Member
 
Sopan
Join Date: Jul 2013
Posts: 1
Rep Power: 0
eurotel is on a distinguished road
After filtering out N-S equation, we get the filtered velocity (\tilde{U}) and filtered residual velocity (\tilde{u'}). Well, if we consider the filtered fluid motion; an instantaneous velocity (u) consists of filtered velocity (\tilde{U} + \tilde{u'}). In Reynolds averaging; if we take average of mean velocity \bar{U} and perturbation velocity(u') we get \bar{\bar{U}} = \bar{U} and \bar{u'} = 0. But if we take Reynolds averaging of (\bar{\tilde{U}}) we get (\bar{\tilde{U}}) \neq(\tilde{U}) also \bar{\tilde{u'}} \neq 0, that is filtered residual velocity is not equal to zero. Also, \bar{\tilde{U}} does not represent the mean motion, but rather the sum of the mean motion plus the large scales in the turbulence.
eurotel is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
need 2d equation for navier stokes in c sudeep FLUENT 1 February 16, 2011 18:01
Adding a term to Navier Stokes Equation ashtonJ CFX 3 January 15, 2011 07:32
coupling KE equation with navier stokes equation prashant FLUENT 0 March 7, 2008 08:05
Newbie:Viscoelasticity and Navier stokes equation Rajil Saraswat Main CFD Forum 2 June 9, 2003 08:21
1-d navier stokes equation Robert Main CFD Forum 0 December 20, 2002 03:14


All times are GMT -4. The time now is 05:36.