|
[Sponsors] |
September 22, 1999, 19:38 |
Speziale Nonlinear k-e model
|
#1 |
Guest
Posts: n/a
|
Hello;
Please tell me about the boundary conditions and wall functions that should be used for 'Speziale Nonlinear k-e model'.(High Reynolds Number) As I have seen in wilcox book, it most be same wall functions as standard k-e model; but with same wall functions, I get same results as standard k-e model for my working geometery (Impinging jet) for boundary parameteres like pressure distribution on impinged wall. Please tell me what is the right way. Thank you. |
|
September 24, 1999, 08:21 |
Re: Speziale Nonlinear k-e model
|
#2 |
Guest
Posts: n/a
|
Hello, in my opinion, bc's should be the same because wall functions are based on the assumption of isotropic turbulence. This is true at some distance to the wall, not in the immdiate vincinity (but this region should be bridged by wall functions). Speziales model influences the flow mostly apart from the vincinity of walls.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
multiphaseInterFoam for RAS turbulence model | chiven | OpenFOAM Bugs | 8 | December 6, 2017 03:08 |
about Subgrid-scale model | impecca | OpenFOAM Running, Solving & CFD | 4 | December 20, 2013 11:36 |
2 stage axial turbine model convergence issues | sherifkadry | CFX | 2 | September 7, 2009 21:51 |
multi fluid mixture model issue | rystokes | CFX | 3 | August 9, 2009 20:13 |
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model | Jonas Larsson | FLUENT | 5 | March 13, 2000 04:27 |