CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

problem with two-phase in Fluent 5.01

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 25, 1999, 05:19
Default problem with two-phase in Fluent 5.01
  #1
wang haigang
Guest
 
Posts: n/a
Recently i used Fluent 5.01 to simulate gas-particle flow in Fluizded bed,when the second phase(solid) particle's diameter is over the default(10e-5),the solver diverge.the vectory of the slip is very high.could you tell my the reason. thank you very much!
  Reply With Quote

Old   September 25, 1999, 22:56
Default Re: problem with two-phase in Fluent 5.01
  #2
John C. Chien
Guest
 
Posts: n/a
(1). There was a program on PBS the other night on Albert Einstein. It took him 10 years to create the special theory of relativity. So, I think, everything is relative. (2). So, if you can't beat them, join them. (3). If can't make the particle size larger, make the rest of it smaller. (by the way, what is 10e-5? you should check whether there is a limit on the range of particle sizes before you use the code. And after that, check the particle size and make sure that it is correct,regardless the code you use. ) (4). The number 10e-5 is sure worse than Y2K to produce diverged solution.
  Reply With Quote

Old   September 27, 1999, 16:50
Default Re: problem with two-phase in Fluent 5.01
  #3
David Schmidt
Guest
 
Posts: n/a
First of all, I am assuming that you are using the discrete particle model for simulating the fluidized bed.

You should check a few things:

1) The volume occupied by the particles should be less than ten percent of the cells' volume. If the particle loading exceedes this, then the DPM model isn't valid.

2) Each numerical particle represents a certain amount of mass flow (or alternatively, a certain number of particles). The more numerical particles you have, the better.

3) You need to check the integration length scale and some of the other numerical setting in Fluent.

Dr. David Schmidt, Consultant
  Reply With Quote

Old   October 15, 1999, 13:01
Default Re: problem with two-phase in Fluent 5.01
  #4
B. Laubacher
Guest
 
Posts: n/a
I've seen this happen myself.. I was encountering divergence with the turbulence parameters when running 2 phase. We're checking into it.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A Problem of Fluent Interpreted UDF: parse error knight Fluent UDF and Scheme Programming 11 December 8, 2013 10:00
Problem about Fluent on Linux hbinma FLUENT 3 July 6, 2008 11:49
Problem in Tutorial problem of fluent Phanindra FLUENT 5 April 17, 2007 10:57
Problem using parallel Fluent Gustavo FLUENT 0 June 28, 2004 00:12
Can FLUENT solve this type of problem? Whitaker FLUENT 3 October 23, 2000 04:01


All times are GMT -4. The time now is 22:13.