CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   grid generator for turbo machinery. (http://www.cfd-online.com/Forums/main/13547-grid-generator-turbo-machinery.html)

Stelios May 30, 2007 09:00

grid generator for turbo machinery.
 
Dear friends can you propose me any (N.S. quality) grid generator for turbo machinery (Fransis)!

Thanks Stelios

Ahmed May 30, 2007 10:10

Re: grid generator for turbo machinery.
 
Numeca or Ansys (check their web sites) if you are looking for a commercial product, otherwise check the Wiki, you might find a free product that does the job

Joern Beilke May 30, 2007 11:21

Re: grid generator for turbo machinery.
 
http://www.gridpro.com/gridgallery/t...ines_link.html

GridPro give you a much better grid quality than ICEM Hexa.


mehul May 31, 2007 00:56

Re: grid generator for turbo machinery.
 
you can try with bladmodeler and bladegenplus.

aurel June 20, 2007 03:05

Re: grid generator for turbo machinery.
 
hi Ahmed,

I tried looking for some free turbo mesher in cfd wiki and have spent quite a time googl-ing a time ago but could not find anything (from the family of block structured generator).

I decidied to write a fortran code for elliptic block structured grid generator. I succeded patrialy and use resulting mesh generator in blade profile optimization loop.

Next I would like to enhace the mesher, but I need some consultation with a spetialist. Do you happen to know some?

thanks.


All times are GMT -4. The time now is 01:40.