|
[Sponsors] |
June 4, 2007, 11:01 |
C-Grid Around airfoil
|
#1 |
Guest
Posts: n/a
|
When generating a C grid around the airfoil what boundary condition do we apply along the top and bottom cut.I have not been able to find any information on the implementation of boundary condition along those lines.
Thanks a lot |
|
June 4, 2007, 12:32 |
Re: C-Grid Around airfoil
|
#2 |
Guest
Posts: n/a
|
add two row of halo grid for bottom and top cut and copy value of bottom cut to halo row of top cut and vise versa(we don't have physical boundary in cut and so this boundary is virtual)
|
|
June 4, 2007, 20:43 |
Re: C-Grid Around airfoil
|
#3 |
Guest
Posts: n/a
|
Or i believe you can just deal with it directly since there is actually no boundary. u'll 've to modify the cell connection tt's all.
btw, u can look at blazek CFD book http://www.amazon.com/Computational-.../dp/0080430090 |
|
June 11, 2007, 14:31 |
Re: C-Grid Around airfoil
|
#4 |
Guest
Posts: n/a
|
Since there are two points for each point (if you get that) on the wake cut. An accepted route to go is simply to use the average of the points on either side of it, i.e.
Q(n=1) = Q(n=2) + Q(n=nmax-1) / 2 Q(n=nmax) = Q(n=1) |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help! Validity of unstructured grid on S809 airfoil | didiean | FLUENT | 11 | April 3, 2011 02:10 |
Grid generation of an airfoil in Ansys workbench 12.1 | sunish5 | ANSYS | 1 | October 26, 2010 23:29 |
2D airfoil simulation, turbulence, boundary layer, unstructured grid | louis.langouche@gmail.com | FLUENT | 0 | March 3, 2010 08:19 |
Structured Airfoil Grid Generator | A.S. | Main CFD Forum | 1 | September 30, 2008 18:29 |
Combustion Convergence problems | Art Stretton | Phoenics | 5 | April 2, 2002 05:59 |