CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Finite element Analysis-Supersonic flow past cavities (http://www.cfd-online.com/Forums/main/1376-finite-element-analysis-supersonic-flow-past-cavities.html)

SATISH A.V October 8, 1999 16:03

Finite element Analysis-Supersonic flow past cavities
 
I want to analyse supersonic flow (air) over rectangular cavity located at the bottom wall of rectangular duct using NISA-3D FLUID(COMPRESSIBLE) Package.

Since the pressure inside is oscillatory, I need to evaluate Pressure at selected nodal points at every 10 micro second for 25000 times continuously so that this can be used to find frequencies of pressure oscillation using FFT.

How to determine pressure values as above in NISA package.

If not possible, any other package available?

Zhang Yuan Wu October 23, 1999 03:28

Re: Finite element Analysis-Supersonic flow past cavities
 
my friend,

first you learn what is FEM, then go for unsteady pressure picking . I mean you must be thorough in basics. It seems that you want to do unsteady FEM using NISA in a short time. It will be impossible for people like you . OK all the best.


All times are GMT -4. The time now is 08:32.