CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

About multiphase simulation for cyclone separator

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 7, 2007, 06:45
Default About multiphase simulation for cyclone separator
  #1
Sushil
Guest
 
Posts: n/a
Hi,

I am trying to simulate the flow through the cyclone separator, can any one help me out in doing this...! I'm not able to put boundry conditions properly...! main problem is with turbulent kinetic energy and dissipation rate.....! after that in back flow turbulant KE ...! values which I got using the formulae are very huge...n sooner iterations are strated it get diverged....!

so please any one help me out...let me know how these BC's should be applied...?

thanks in advance...!

regards, sushilkumar.sonar
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Volume fraction in multiphase simulation juliom CFX 2 July 30, 2011 09:26
Multiphase Simulation giving wrong results niazaliahmed STAR-CCM+ 2 June 17, 2011 01:41
multiphase oil air separator tips matt giuli CFX 1 October 6, 2008 23:50
Single phase result file for multiphase simulation Kushagra CFX 2 July 8, 2008 22:14
multiphase simulation... 2D flow through an elbow Tim CFX 10 April 3, 2008 19:13


All times are GMT -4. The time now is 10:18.