CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Gambit meshing problem (http://www.cfd-online.com/Forums/main/13825-gambit-meshing-problem.html)

David Banks July 19, 2007 11:48

Gambit meshing problem
 
Hi everyone

I have plotted points in the 3D domain in Gambit and connected those with the same depth to create lines representing the bathymetric geometry. I have then created a box around this to allow me to apply an velocity input to see what happens to the sea flow as it passes over there varying depths.

Ok. I have meshed all the connecting lines and then tried to mesh the volume, when I encountered a problem. It is telling me;

"face 13 could not be converted to a submappable region"

Could someone tell me what might make a face "un-submappable"?

What are the best settings for meshing a volume like this? Thankyou all


All times are GMT -4. The time now is 04:03.