CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 24, 2007, 05:37
Default question
Posts: n/a
hello I have a problem about simulating a flume with 180 degree bend conjunction with intake at 115 degree that intake has a gate at his downstream end. I want to know how i can set boundery condition FOR OUTFLOW at the end of main flume and intake in VOF modell while just water outflows from intake and both water and air outflow from main channel. for example : flow rate weighting for outflow intake=0.4 flow rate weighting for outflow main channel(air)=0.3 flow rate weighting for outflow main channel(water)=0.3

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unanswered question niklas OpenFOAM 2 July 31, 2013 16:03
internal field question - PitzDaily Case atareen64 OpenFOAM Running, Solving & CFD 2 January 26, 2011 16:26
Question about Table applicaiton. universez OpenFOAM Running, Solving & CFD 0 January 12, 2010 21:31
CHANNEL FLOW: a question and a request Carlos Main CFD Forum 4 August 23, 2002 05:55
question K.L.Huang CD-adapco 1 March 29, 2000 04:57

All times are GMT -4. The time now is 03:16.