|August 25, 2014, 11:36||
temperature limited to ... Combustion simualtion
Join Date: Jan 2014
Posts: 2Rep Power: 0
I am doing a simple tube methane combustion simulation using Laminar Finite Rate combustion model. The tube is 8.5m by 0.08m in 2D. I patched 9.5% methane to the filled zone and ignited it by ignition model. The initial time step size is 0.001s and set as adaptive.
The problem is, after I run the calculation, the TUI always give me something like:
temperature limited to 2.300000e+03 in 93 cells on zone 2 in domain 1
in the flame zone and the continiuty residue went up to very high value and soon got diverged.
Anybody can help me out??
Thank you very much!!!!!!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Temperature limited to.. divergence after 30000 iterations||songpen1985||FLUENT||0||July 8, 2014 02:21|
|coal combustion temperature failure||a_cucen||FLUENT||4||April 24, 2014 04:08|
|combustion simualtion in large scale||Habibfateh||OpenFOAM Running, Solving & CFD||0||April 11, 2014 07:09|
|temperature limited warning in 1 cell||Shamoon Jamshed||FLUENT||1||April 3, 2014 04:00|
|Limited temperature and pressure warnings||Shamoon Jamshed||FLUENT||0||July 7, 2009 16:20|