CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

How does EFD.Lab solve the boundary layer?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 26, 2007, 03:52
Default How does EFD.Lab solve the boundary layer?
  #1
Christiaan
Guest
 
Posts: n/a
Hi

I am busy with my final year project which investigates the results that different CFD codes produce. I am simulating an airfoil at various angles of attack and Reynolds numbers. I have already performed the simulations in STAR-CD and Fluent.

I am now going to start using EFD.Lab. However before I do, I would like to learn more about this code. How does EFD.Lab solve the boundary layer? I have Googled the topic without sufficient results.

Is there any one out there that can assist me, please?

Regards Christiaan

  Reply With Quote

Old   October 1, 2007, 08:04
Default Re: How does EFD.Lab solve the boundary layer?
  #2
ddit
Guest
 
Posts: n/a
Hi Christiaan,

as far as I know EFD.lab throws a grid over the whole system. On the cells which are cut by a wall they look in a database after the flow conditions for this partial cell. Seems to work quite well for not too complicated cases. Try to google after FlowWorks it's the same just sold by SolidWorks.

Regards

Dirk
  Reply With Quote

Old   October 1, 2007, 12:45
Default Re: How does EFD.Lab solve the boundary layer?
  #3
Christiaan
Guest
 
Posts: n/a
Hello Dirk,

Thank you for the reply. So EFD.lab does not implement a log-law function or any other form to solve the flow?

Regards, Christiaan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] 3D boundary layer and meshing problem in GAMBIT 2.4.6 prashanthreddyh ANSYS Meshing & Geometry 1 December 20, 2011 01:35
3D Boundary Layer Mario FLUENT 0 February 17, 2009 04:40
CREATION OF BOUNDARY LAYER Jibran Haider FLUENT 3 August 1, 2008 00:33
GAMBIT problem with 3D Boundary Layer when meshing Anthony Haroutunian FLUENT 2 March 26, 2008 03:02
New topic on same subject - Flow around race car Tudor Miron CFX 15 April 2, 2004 06:18


All times are GMT -4. The time now is 02:26.