CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

shock reflection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 2, 2007, 00:57
Default shock reflection
  #1
Shuo
Guest
 
Posts: n/a
I running the shock reflection test case for my compressible flow solver. I have applied the required B.C.

(Uniform Ma = 2.9 flow at LHS, top boundary specify the conditions behind a shock that would turn the flow 11 deg, Flow tangency at the wall and all variables are extrapolated at the RHS, Uniform condition specified everywhere except top boundary for initial condition)

but the shock simply hits the wall and doesn't reflect. Any advice?

thanks SHuo
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shock wave reflection Zato_Ichi OpenFOAM Running, Solving & CFD 0 April 13, 2011 14:35
shock tube reflection boundary conditions euler 1d micheletuttafesta Main CFD Forum 1 May 8, 2010 11:01
shock reflection shuo Main CFD Forum 2 October 16, 2007 18:56
shock reflection shuo Main CFD Forum 1 August 25, 2007 02:04
Will compression waves overtake a moving shock? GRA Main CFD Forum 2 October 19, 2006 00:24


All times are GMT -4. The time now is 20:52.