CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Duct losses

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 29, 2008, 04:56
Default Duct losses
  #1
kk
Guest
 
Posts: n/a
hi all,

Good day...

Duct losses due friction & bends in sheet metal duct to be calculated theoratically . What factors will influence. can i have any analytical method. please advice me.....

thankyou...
  Reply With Quote

Old   February 29, 2008, 14:03
Default Re: Duct losses
  #2
allan
Guest
 
Posts: n/a
Hi

You need to determine whether your flow is laminar or turbulent.

You could use bernoulli's equation. Look up any fluid mechanics text book in the section for pipes running full. Friction factors can be found from a moody diagram, losses due to bends, expansions and contractions are more than likely to be found in the textbook.

You could also use cfd.

allan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
buoyancy - losses estimation through total pressure clrsgfn CFX 4 November 10, 2010 11:05
Fabric Duct Modeling Dan FLUENT 0 June 30, 2008 15:00
Total pressure increase in the diverging duct shiv CD-adapco 3 February 1, 2008 03:39
modelling fuel cell duct in fluent rajesh kumar tippabhotla FLUENT 2 October 7, 2004 12:04
flow simulation across a small fan jane luo Main CFD Forum 15 April 12, 2004 17:49


All times are GMT -4. The time now is 00:30.