CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Urgent question for B.C.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 1, 2008, 19:24
Default Urgent question for B.C.
  #1
jinwon park
Guest
 
Posts: n/a
Sorry you all. I am solving 2-D axi-symmetric flow with the azimuth directional symmetry. That is, I am solving Euler equations for r and z direction. So the geometric source term is divided by 1/r. To reflect symmetric B.C. along z-direction(axial direction), I applied that u(r direction vel.) is zero and the gradient of axial velocity dv/dr is zero. However, it has not worked well with unphysical reflection from the symmetry axis. If anyone had similar ones, please advice me how to properly impose the axi-symmetric B.C for the case where problems are independent on azimuth direction. Thanks a lot.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] URGENT!!! "Import from GAMBIT to ANSYS-12.1 (Design Modeler/Geometry)" MDinc ANSYS Meshing & Geometry 13 September 13, 2012 09:26
internal field question - PitzDaily Case atareen64 OpenFOAM Running, Solving & CFD 2 January 26, 2011 15:26
URGENT!!! "Import from GAMBIT to ANSYS-12.1 (Design Modeler/Geometry)" MDinc FLUENT 1 November 24, 2010 01:59
Question about Table applicaiton. universez OpenFOAM Running, Solving & CFD 0 January 12, 2010 20:31
question about uds tanven FLUENT 1 October 27, 2009 09:55


All times are GMT -4. The time now is 23:30.