CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Wall fonction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 3, 1999, 07:18
Default Wall fonction
  #1
chaker
Guest
 
Posts: n/a
Hi..

I work with turbulent natural convection flow of air in the square cavity with differentially heated vertical side walls. I use the following wall fonction for turbulent variables: K=0. at the wall Epsilon=Cte (K^(3/2))/l at the first inner grid point with l the closest distance to wall

I use Cte=0.4 is it true??? or may I use an other value???

Thanks for your help
  Reply With Quote

Old   November 3, 1999, 10:44
Default Re: Wall fonction
  #2
Valdemir G. Ferreira
Guest
 
Posts: n/a
Hi,

The constants in K-epsilon model are not the same for all flows.I suggest you look for relacted flows in square cavities.

Valdemir.
  Reply With Quote

Old   November 4, 1999, 05:45
Default QUICK or CUI is third order?
  #3
Grigory
Guest
 
Posts: n/a
Hi, I consider well known van Leer class of the k-scheme: phi_f=phi_C+(1/4){(1+k)(phi_D - phi_C)+(1-k)(phi_C-phi_U)}. In many papers it is written that setting k = 1/3 we receive the scheme of the 3-rd order (so-called CUI scheme), but I receive the 3-rd order only at k = 1/2 (i.e. QUICK-scheme). Where can be an error? Grigory.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Fluent3DMeshToFoam simvun OpenFOAM Meshing & Mesh Conversion 50 January 19, 2020 16:33
Natural convection in a closed domain STILL NEEDING help! Yr0gErG FLUENT 4 December 2, 2019 01:04
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 21:30
Multicomponent fluid Andrea CFX 2 October 11, 2004 06:12


All times are GMT -4. The time now is 06:41.