CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

reaction Rate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 18, 2008, 13:03
Default reaction Rate
  #1
Asghari
Guest
 
Posts: n/a
Hi;

I solved a combustion problem.My geometry was cylendrical. I used EBU-Arreius model that is minimum of ebu(eddy break up) and Arrenius model to calculate reaction rate . But in my postprocessing, temperature was almost everywhere low (between 400~500),whereas temperature should be greater than 2000.As soon as I used ebu(eddy break up) model , results tended to more logical temperetures. Nevertheless in literature it has been accepted EBU-Arrenius model , but in my code only EBU has logical results.Which model do you suggest?Why did it occur for my problem?

Thanks alot for any help.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation fault in running alternateSteadyReactingFoam,why? NewKid OpenFOAM 18 January 20, 2011 16:55
UDF for catalyst volumetric reaction, temperature overshoot though rate is small elmcmaster FLUENT 0 October 11, 2010 09:37
surface reaction rate with udf yellow-stuff FLUENT 4 January 29, 2010 12:53
UDF changing the rate exponent of a reaction Stefan H Fluent UDF and Scheme Programming 0 September 16, 2009 13:20
chemical reaction - decompostition La S. Hyuck CFX 1 May 23, 2001 00:07


All times are GMT -4. The time now is 09:00.