NASA-VOF 3D code

March 14, 2001, 09:09

I'm get report with NASA-VOF3D from lanl. And rebuild with Delphi, for skilful in pascal. But I found it run with error, case in casting pour. When I set right boundry as Flow-3D. But there no advection. So I'm oubtful of code from report. But I could not get fortran source include some example. Also could not get fortran source file. I'm use the source append report. Would you have these source and full example. pls send me. And I think my program is no wrong, 100% translate from report.

At the first, I use simplest case such as broken dam. But VOF has some

problems for three dimension. Also pressure is in and increase and

increase, and VOF are misty and misty. I try find what error which

translaterd program for one month. Unfortunately, It's without result. Are you interest in my program written by Delphi 5.0 use OOP technologic.

And this program have OpenGL visualizer, full mesh generator with STL(also

may include STEP/IGES in the further). This program is written at one years ago. But not run well, so I lie over. Are you have time to read this program and tell me what error. If you obliging, I'll send this program (include source) with email.

March 16, 2001, 11:40

I am expirienced Delphi user and work in the field of CFD. I'm Interested in your program and I would like to look at. You can send it to me. Anton

March 18, 2001, 21:06

I had experience in SOLA-VOF methods, and I have developed the mold filling simulation software using this method. I maybe help you.

March 19, 2001, 23:34

I am working in two-phase flow with free surface. Could you please tell me How I can get the report for NASA-VOF3D

Tareq Al-Shaalan

March 20, 2001, 23:03

I am working with VOF and have been developing Hyprid FEM/FDM/Control Volume Method to simulate viscous fluid flow. Could you please tell me How I can get the report for NASA-VOF3D? Thanks

gma · June 14, 2009, 21:56

I'm working on the simulation of wave breaking. Can anyone give me NASA-VOF3D source code? Thank you in advance.

email: gma@udel.edu

Hussam · November 20, 2009, 16:47

Dear Sir,
First, I want to test program SOLA-VOF to solve the Broken Dam problem but with an obstacle.
I find some difficults to take the Mesh, BC.
Please help me in that.

Hussam
IRAQ

wyf518 · March 5, 2010, 06:23

Can anyone share me with NASA-VOF3D technical report? Thanks a million.

wyf518 · March 5, 2010, 06:24

Can anyone share me with NASA-VOF3D technical report? Thanks a million. cylyt@yahoo.com.cn

shipgod63 · August 30, 2010, 10:39

Dear Friends

I have nasa vof codes and documents. but my codes is run with very errors. I think the codes is written in ancient fortran. whould you please help for? may you share your appropraite code that run properly? please help me,

Best regards,

morteza08 · August 30, 2010, 15:47

hi.....i am expert in delphi and fortran and some other programming language..
i worked with VOF code for my MSc thesis..i am ready to help you....
to edit and debug your send it to my mail address and tell me the problemmmm
we can continue discussing about it by mail
morteza08 at gmail.com

Amiragha72 · August 31, 2010, 22:14

Hi Morteza
can i have a copy of Code (+ documnet if available)?
my email amiragha72@yahoo.com
thannk you

ves · June 21, 2011, 14:05

Pressure instability in breaking dam simulation is problem for VOF3D and SOLA VOF. I am recovered SOLA VOF from report, undular bore problem OK, breaking dam failure, preesure unbounded increase

novan tofany · February 7, 2012, 02:02

Dear Friends

I'm now working on my research related to wave breaking simulation..i have already converted original NASA-VOF2D to MATLAB code.
i'm very sure that my code runs properly..
however,i have a problem here to test the output of my code,
the original report either SOLA-VOF / NASA_VOF2D don't completely include the input data for testing them, only very limited information and several graphics and if i follow the data there, i could not get the same results as showed in the report..there are so many error, especially for the pressure solution..
can anyone share me about how to solve this problem? or does anyone have any information such as input data for simulating a breaking bore problem or Sample test problem in SOLA VOF report (page 45)?

Please share with me at novtov354@gmail.com

novan tofany · February 7, 2012, 02:08

Hello qdu..

could you help me to solve my problem in using SOLA-VOF code..
can i talk with you directly by email..my mail novtov354@gmail.com
Thank you for your cooperation

walid_cfd · March 12, 2012, 09:15

I am working on free surface motion generated by moving bodies in viscous fluids. Would anyone of you please provide me with the NASA-VOF3D code/documentation? I would be really grateful to him/her. My email address is: khalidbinwalid7748@yahoo.com

pzahedi · September 27, 2012, 18:33

could anyone please send me the SOLA-VOF code?my email address is:
pzahedi96@yahoo.com
thanks

shirazbj · September 30, 2012, 09:50

Quote:

Originally Posted by pzahedi

could anyone please send me the SOLA-VOF code?my email address is:
pzahedi96@yahoo.com
thanks

send u an old code.

nikavgGR · March 8, 2015, 12:44

Hi

I am studing 2 phase flows using Ansys software so far.
I am interesting for VOF code to compare results.
I have found documentation for SOLA VOF and NASA 3D VOF code.
As stated they are system dependent so the need to be reprogrammed for the graphic part and the read/write section.
Has anyone in the past did any changes that actually worked?
I see lot of interest in the past for such codes in Fortran so I would really appreciate if someone send my a copy.

contact e-mail nikavg87@gmail.com

Thank you in advance!

March 14, 2001, 09:09	NASA-VOF 3D code	#1
F.F Lin Guest Posts: n/a	I'm get report with NASA-VOF3D from lanl. And rebuild with Delphi, for skilful in pascal. But I found it run with error, case in casting pour. When I set right boundry as Flow-3D. But there no advection. So I'm oubtful of code from report. But I could not get fortran source include some example. Also could not get fortran source file. I'm use the source append report. Would you have these source and full example. pls send me. And I think my program is no wrong, 100% translate from report. At the first, I use simplest case such as broken dam. But VOF has some problems for three dimension. Also pressure is in and increase and increase, and VOF are misty and misty. I try find what error which translaterd program for one month. Unfortunately, It's without result. Are you interest in my program written by Delphi 5.0 use OOP technologic. And this program have OpenGL visualizer, full mesh generator with STL(also may include STEP/IGES in the further). This program is written at one years ago. But not run well, so I lie over. Are you have time to read this program and tell me what error. If you obliging, I'll send this program (include source) with email.

March 16, 2001, 11:40	Re: NASA-VOF 3D code	#2
Anton Guest Posts: n/a	I am expirienced Delphi user and work in the field of CFD. I'm Interested in your program and I would like to look at. You can send it to me. Anton

March 18, 2001, 21:06	Re: NASA-VOF 3D code	#3
qdu Guest Posts: n/a	I had experience in SOLA-VOF methods, and I have developed the mold filling simulation software using this method. I maybe help you.

March 19, 2001, 23:34	Re: NASA-VOF 3D code	#4
Tareq Al-shaalan Guest Posts: n/a	I am working in two-phase flow with free surface. Could you please tell me How I can get the report for NASA-VOF3D Tareq Al-Shaalan

March 20, 2001, 23:03	Re: NASA-VOF 3D code	#5
Rechard C. Guest Posts: n/a	I am working with VOF and have been developing Hyprid FEM/FDM/Control Volume Method to simulate viscous fluid flow. Could you please tell me How I can get the report for NASA-VOF3D? Thanks

June 14, 2009, 21:56	sorce code	#6
gma New Member Gangfeng Ma Join Date: Jun 2009 Posts: 2 Rep Power: 0	I'm working on the simulation of wave breaking. Can anyone give me NASA-VOF3D source code? Thank you in advance. email: gma@udel.edu

November 20, 2009, 16:47	solve the Broken Dam problem by SOLA-VOF	#7
Hussam New Member Hussam Join Date: Mar 2009 Posts: 16 Rep Power: 17	Dear Sir, First, I want to test program SOLA-VOF to solve the Broken Dam problem but with an obstacle. I find some difficults to take the Mesh, BC. Please help me in that. Hussam IRAQ

March 5, 2010, 06:23		#8
wyf518 New Member Liu Jin Guang Join Date: Mar 2010 Posts: 2 Rep Power: 0	Can anyone share me with NASA-VOF3D technical report? Thanks a million.

March 5, 2010, 06:24		#9
wyf518 New Member Liu Jin Guang Join Date: Mar 2010 Posts: 2 Rep Power: 0	Can anyone share me with NASA-VOF3D technical report? Thanks a million. cylyt@yahoo.com.cn

August 30, 2010, 10:39	vof	#10
shipgod63 New Member abbas dashti manesh Join Date: Jul 2010 Posts: 9 Rep Power: 15	Dear Friends I have nasa vof codes and documents. but my codes is run with very errors. I think the codes is written in ancient fortran. whould you please help for? may you share your appropraite code that run properly? please help me, Best regards,

August 30, 2010, 15:47	hi	#11
morteza08 Senior Member Morteza Join Date: May 2010 Location: Iran,Islamic Republic of Posts: 161 Rep Power: 15	hi.....i am expert in delphi and fortran and some other programming language.. i worked with VOF code for my MSc thesis..i am ready to help you.... to edit and debug your send it to my mail address and tell me the problemmmm we can continue discussing about it by mail morteza08 at gmail.com

August 31, 2010, 22:14		#12
Amiragha72 New Member Amir Join Date: Mar 2009 Posts: 8 Rep Power: 17	Hi Morteza can i have a copy of Code (+ documnet if available)? my email amiragha72@yahoo.com thannk you

June 21, 2011, 14:05		#13
ves Member Veskov Eugene Join Date: Feb 2011 Posts: 31 Rep Power: 15	Pressure instability in breaking dam simulation is problem for VOF3D and SOLA VOF. I am recovered SOLA VOF from report, undular bore problem OK, breaking dam failure, preesure unbounded increase

February 7, 2012, 02:02		#14
novan tofany New Member Novan Tofany Join Date: Feb 2011 Posts: 14 Rep Power: 15	Dear Friends I'm now working on my research related to wave breaking simulation..i have already converted original NASA-VOF2D to MATLAB code. i'm very sure that my code runs properly.. however,i have a problem here to test the output of my code, the original report either SOLA-VOF / NASA_VOF2D don't completely include the input data for testing them, only very limited information and several graphics and if i follow the data there, i could not get the same results as showed in the report..there are so many error, especially for the pressure solution.. can anyone share me about how to solve this problem? or does anyone have any information such as input data for simulating a breaking bore problem or Sample test problem in SOLA VOF report (page 45)? Please share with me at novtov354@gmail.com

February 7, 2012, 02:08		#15
novan tofany New Member Novan Tofany Join Date: Feb 2011 Posts: 14 Rep Power: 15	Hello qdu.. could you help me to solve my problem in using SOLA-VOF code.. can i talk with you directly by email..my mail novtov354@gmail.com Thank you for your cooperation

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Segmentation fault in running alternateSteadyReactingFoam,why?	NewKid	OpenFOAM	18	January 20, 2011 16:55
ask for VOF code	Yiqiang Lin	Main CFD Forum	0	October 29, 2007 09:58
Design Integration with CFD?	John C. Chien	Main CFD Forum	19	May 17, 2001 15:56
What is the Better Way to Do CFD?	John C. Chien	Main CFD Forum	54	April 23, 2001 08:10
own Code vs. commercial code	Bernhard Mueck	Main CFD Forum	10	February 16, 2000 10:07

March 12, 2012, 09:15	NASA-VOF3D source code	#16
walid_cfd New Member Join Date: Sep 2011 Posts: 2 Rep Power: 0	I am working on free surface motion generated by moving bodies in viscous fluids. Would anyone of you please provide me with the NASA-VOF3D code/documentation? I would be really grateful to him/her. My email address is: khalidbinwalid7748@yahoo.com

September 27, 2012, 18:33		#17
pzahedi New Member peyman Join Date: Mar 2012 Posts: 8 Rep Power: 14	could anyone please send me the SOLA-VOF code?my email address is: pzahedi96@yahoo.com thanks

March 8, 2015, 12:44	NASA-VOF 3D code	#19
nikavgGR New Member Nikos Tsipras Join Date: Feb 2015 Posts: 1 Rep Power: 0	Hi I am studing 2 phase flows using Ansys software so far. I am interesting for VOF code to compare results. I have found documentation for SOLA VOF and NASA 3D VOF code. As stated they are system dependent so the need to be reprogrammed for the graphic part and the read/write section. Has anyone in the past did any changes that actually worked? I see lot of interest in the past for such codes in Fortran so I would really appreciate if someone send my a copy. contact e-mail nikavg87@gmail.com Thank you in advance!