CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

MAKING A WIND TUNNEL

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 31, 2008, 08:36
Default MAKING A WIND TUNNEL
  #1
Shriram
Guest
 
Posts: n/a
i need to make a wind tunnel of plywood for testing a plate fin heat exchanger . the exhaust from the engine is fed through the Wind tunnel and then to the heat exchanger. the heat exchanger of of 60 com in length and fins of 15*15 are welded over it.the temperature of exhaust is around 500'c.

The diagram of the entire process is given in this link. It a 2MB image file.

Please help me on making the wind tunnel.

Thank You http://rapidshare.com/files/10377812...unnel.bmp.html
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
swak4foam building problem GGerber OpenFOAM Installation 54 April 24, 2015 16:02
flow in cyclic wind tunnel yogesh@cfd Main CFD Forum 0 November 8, 2010 05:28
how to consider perforated wind tunnel wall in CFD simulation littlelz CFX 4 June 11, 2009 05:51
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51
Virtual Wind Tunnel in FLUENT ND FLUENT 0 April 7, 2006 07:43


All times are GMT -4. The time now is 15:39.