CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Gambit mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2008, 07:24
Default Gambit mesh
  #1
rgp
Guest
 
Posts: n/a
Hi all,

I am working on 2-d mesh in gambit, all of my geometry is not square in shape.

The inlet is square, and the outlet is square in shape. I have a swirler in between. I dont know how to mesh. what should I use Quad, Tri, Tri Priimitive, All this meshes my geometry but I am confused what to use.

Thanks
  Reply With Quote

Old   April 21, 2008, 19:45
Default Re: Gambit mesh
  #2
Mohamed
Guest
 
Posts: n/a
Hello ,

You should check this page http://202.41.85.84/doc/gambit2.2/ht...guide/tg09.htm

Best regards, Mohamed
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
Successive Mesh in Gambit ashish FLUENT 0 April 28, 2006 01:42
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
[Commercial meshers] Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Meshing & Mesh Conversion 5 April 21, 2005 14:42


All times are GMT -4. The time now is 07:23.