- **Main CFD Forum**
(*http://www.cfd-online.com/Forums/main/*)

- - **comsol cantilever beam problem
**
(*http://www.cfd-online.com/Forums/main/15360-comsol-cantilever-beam-problem.html*)

comsol cantilever beam problem
Hello,
I have started working on COMSOL and doing simple problems. I have done a problem on cantilever beam with a point load on the tip. the data is given below. beam dimensions: (8e-6, 1e-6, 1e-6) point on which load applies: (8e-6, 0.5e-6, 1e-6) load: 1e-5 in -z direction. material properties isotropic material young's modulus: 170Gpa poisson's ratio: 0.25 thermal expansion coeff.: 8.5e-6 density: 2330 kg/m3 NO DAMPING condition. time steps are 0:1e-10:5e-7 beam is fixed on one end. i am in structural mechanics module, with transient analysis mode. i want to get 'z displacement Vs. time' plot. the plot i am getting is attached. i want to know whether this plot is correct or wrong? as i am giving 'no damping', why my deflection stops after some time? shouldn't it be continuous like a sine wave as with no damping, it will behave like it is in space?Hello, I have started working on COMSOL and doing simple problems. I have done a problem on cantilever beam with a point load on the tip. the data is given below. beam dimensions: (8e-6, 1e-6, 1e-6) point on which load applies: (8e-6, 0.5e-6, 1e-6) load: 1e-5 in -z direction. material properties isotropic material young's modulus: 170Gpa poisson's ratio: 0.25 thermal expansion coeff.: 8.5e-6 density: 2330 kg/m3 NO DAMPING condition. time steps are 0:1e-10:5e-7 beam is fixed on one end. i am in structural mechanics module, with transient analysis mode. i want to get 'z displacement Vs. time' plot. i want to know the shape of the plot? in my plot, the deflection stops after some time. as i am giving 'no damping', why my deflection stops after some time? shouldn't it be continuous like a sine wave as with no damping, it will behave like it is in space? |

All times are GMT -4. The time now is 15:20. |