"Numerical Computation of Internal..." by Hirsch

August 1, 2008, 05:44

Hi,

I'm considering buying the new edition of this classic reference. I've never used it, but it is very famous in the field and the new edition is quite cheap. Would you recommend it? Or are there better new books on CFD for roughly the same price?

Best Regards,

Sergio

August 1, 2008, 08:49

The older version is a very complete reference, although the material can be somewhat terse. There is also a distinct tilt toward finite element methods, although the material on finite volume and finite difference is fairly thorough. I like my Hirsch, but it is not really a good book for beginners. If you have some experience in the field of CFD then it can be a useful addition to a CFD library.

August 5, 2008, 09:01

Hi, I have both vol 1 and 2 , Its simply excellant just excellant, worth spending some bucks on this book

August 6, 2008, 08:02

I have some experience in CFD and since I'm writing a Discontinuous Galerkin NS-RANS code, I'd like some extra background in FE, so I'll get the book.

Best,

Sergio

August 1, 2008, 05:44	"Numerical Computation of Internal..." by Hirsch	#1
Sergio Rossi Guest Posts: n/a	Hi, I'm considering buying the new edition of this classic reference. I've never used it, but it is very famous in the field and the new edition is quite cheap. Would you recommend it? Or are there better new books on CFD for roughly the same price? Best Regards, Sergio

August 1, 2008, 08:49	Re: "Numerical Computation of Internal..." by Hirs	#2
ag Guest Posts: n/a	The older version is a very complete reference, although the material can be somewhat terse. There is also a distinct tilt toward finite element methods, although the material on finite volume and finite difference is fairly thorough. I like my Hirsch, but it is not really a good book for beginners. If you have some experience in the field of CFD then it can be a useful addition to a CFD library.

August 5, 2008, 09:01	Re: "Numerical Computation of Internal..." by Hirs	#3
Ramesh.K Guest Posts: n/a	Hi, I have both vol 1 and 2 , Its simply excellant just excellant, worth spending some bucks on this book

August 6, 2008, 08:02	Re: "Numerical Computation of Internal..." by Hirs	#4
Sergio Rossi Guest Posts: n/a	I have some experience in CFD and since I'm writing a Discontinuous Galerkin NS-RANS code, I'd like some extra background in FE, so I'll get the book. Best, Sergio

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem in the CFX12.1 parallel computation	BalanceChen	ANSYS	2	July 7, 2011 10:26
Internal boundary problem	stefanke	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	2	May 24, 2011 02:21
TGridFluent mesh with internal by prism layer and internal face for diagnostic	sponiar	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	2	March 30, 2009 15:02
numerical simulation of internal combustion engine	hamed	FLUENT	0	October 19, 2005 03:03
New Books and Numerical Software	Eleuterio TORO	Main CFD Forum	0	December 18, 1998 12:41