|August 4, 2008, 10:18||
Error in Axisymmetry BC
Hello I am modeling a compressible flow. The system is a cylinder attached to a cylindrical pipe to it. The pipe allows water to come into the the cylinder and since the cylinder is full of water pressure is created as the water is pumped in. The Geometry is simple and the use if axisymmetry BC is justified. Inlet BC is mass-flow-rate set to 0.1 Kg/s The walls are set to constant temperature Axisymmetry BC the axis lies in X direction with the domain in the possitive Y direction.
Initialization: Upon initialization the initial values for velocity in x, y direction and temperature changed to 1.#QNAN.
Does anyone knows, had the same problem or know how to overcome this issue?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Axisymmetry problem and XFOIL||JC||Main CFD Forum||2||August 27, 2011 04:16|
|Initialization problem when using Axisymmetry BC||Eduardo||FLUENT||0||August 4, 2008 10:23|
|2D XY, Symmetry and Axisymmetry cases||Gianfranco||FLUENT||0||June 3, 2008 18:35|
|2D axisymmetry Vs non-axisymmetry geometry||aPpA||FLUENT||4||March 22, 2007 10:33|
|2d axisymmetry||Cote||CFX||7||January 12, 2007 11:41|