CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

WIND-US time stepping

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2008, 12:33
Default WIND-US time stepping
  #1
Singh
Guest
 
Posts: n/a
Does any one know what is the default time stepping method in WIND-US? I know the default explicit operator is Roe's second order upwind biased flux diff splitting. Thanks

  Reply With Quote

Old   August 10, 2008, 14:49
Default Re: WIND-US time stepping
  #2
ztdep
Guest
 
Posts: n/a
Dear friends:

Could you please tell me how to download the wind-us. regards
  Reply With Quote

Old   August 11, 2008, 13:36
Default Re: WIND-US time stepping
  #3
Dennis Yoder
Guest
 
Posts: n/a
The following info on obtaining the Wind-US code is taken from: http://www.grc.nasa.gov/WWW/winddocs...obtaining.html

Wind-US, and the associated pre- and post-processing tools, are releasable (for free) to all U. S. owned companies, public and private universities, and government agencies. However, only U. S. citizens and resident aliens may have access to the software. In general, requests from foreign owned, controlled, or influenced (i.e., those with nonresident foreign nationals on the board of directors) corporations will not be granted. Instructions for becoming a registered user may be accessed from the NPARC Alliance home page: http://web.arnold.af.mil/nparc/ or more specifically from: http://web.arnold.af.mil/nparc/NPARC...tructions.html

You may also contact the NPARC Alliance User Support Team via email: nparc-support@info.arnold.af.mil
  Reply With Quote

Old   August 11, 2008, 14:19
Default Re: WIND-US time stepping
  #4
Dennis Yoder
Guest
 
Posts: n/a
The timestepping in Wind-US is described at: http://www.grc.nasa.gov/WWW/winddocs...rical:timestep

The default is first order Euler differencing. Other options include second order, global Newton iteration, and multi-stage Runge-Kutta.

  Reply With Quote

Old   August 11, 2008, 14:20
Default Re: WIND-US time stepping
  #5
singh
Guest
 
Posts: n/a
Could anyone please tell me about the default time stepping scheme used in wind-us??

Thanks
  Reply With Quote

Old   August 11, 2008, 14:23
Default Re: WIND-US time stepping
  #6
singh
Guest
 
Posts: n/a
Thanks so much
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM 6 April 12, 2011 11:24
Modeling in micron scale using icoFoam m9819348 OpenFOAM Running, Solving & CFD 7 October 27, 2007 00:36
Transient simulation not converging skabilan OpenFOAM Running, Solving & CFD 12 September 17, 2007 17:48


All times are GMT -4. The time now is 21:37.