CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

problem meshing in GAMBIT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 20, 2008, 18:06
Default problem meshing in GAMBIT
  #1
khairul hadi
Guest
 
Posts: n/a
hi all...

I a little bit problem in meshing by using GAMBIT software...

My project is need to determine laminar flow in rectangular minichannel ( 1mm x 1mm )...

after done drawing 1mm x 1mm square, then face it, then i try mesh face and choose interval count = 100, so as the result i get as this

http://img171.imageshack.us/img171/8364/1mmx1mmkm3.jpg


why it show curve at 4 corners? why this happen? how can i fix it? or it is normal so small size?

then i try meshing with same shape but this time is 1m x 1m, an as a result, i get this

http://img165.imageshack.us/img165/1...x1meternd5.jpg
http://img165.imageshack.us/img165/1...97500bc405.jpg

or

http://img165.imageshack.us/my.php?i...x1meternd5.jpg

its look ok this time..no curves around its 4 corner...

so anyone, please help me to fix this...or any idea? thanks for read.. best regard

Last edited by wyldckat; September 3, 2015 at 17:20. Reason: disabled embedded images
  Reply With Quote

Old   August 20, 2008, 18:13
Default Re: problem meshing in GAMBIT
  #2
khairul hadi
Guest
 
Posts: n/a
i am sory..

the picture for the 1mm x 1mm mesh is http://img171.imageshack.us/my.php?image=1mmx1mmkm3.jpg

and 1m x 1m http://img165.imageshack.us/my.php?i...x1meternd5.jpg

thanks again help me pls some 1
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GAMBIT meshing problem for boundary layer Falah FLUENT 2 November 30, 2020 15:16
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 06:22
Gambit meshing problem David Banks Main CFD Forum 0 July 19, 2007 12:48
Problem starting Gambit ViHAR MALViYA FLUENT 0 November 10, 2006 11:26
Gambit Meshing Problem Drew FLUENT 3 April 1, 2005 11:50


All times are GMT -4. The time now is 00:32.