Mesh quality drastically going down, when mesh grown normal to the vortex generator -- CFD Online Discussion Forums

November 15, 2018, 14:09	Mesh quality drastically going down, when mesh grown normal to the vortex generator	#1
varunraj.dondapati New Member ANDHRA PRADESH Join Date: Nov 2018 Posts: 1 Rep Power: 0	I have been trying to create Hexa mesh for a vortex generator on a 3D airfoil in Icem Cfd. I tried O-grid as well as H grid for VG region. In both cases, the mesh quality i.e Angle and Det 2x2x2 are very good when yplus and growth are not specified from the VG wall. Once I specify growth with yplus near vg wall, quality is becoming poor. Visually I cannot diagnose any issue, but angle quality is being shown as below 18 deg. Can anyone help me out with what exactly is happening there?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops	avinashjagdale	OpenFOAM Meshing & Mesh Conversion	53	March 8, 2019 09:42
[snappyHexMesh] Improving mesh quality + inlet too coarse	MartinBlx	OpenFOAM Meshing & Mesh Conversion	5	August 2, 2015 22:09
[ICEM] Bad Quality	Anny	ANSYS Meshing & Geometry	7	May 28, 2015 05:03
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
NACA0012 geometry/design software needed	Franny	Main CFD Forum	13	July 7, 2007 15:57

All times are GMT -4. The time now is 13:26.