CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Adiabatic Flame Temperature (http://www.cfd-online.com/Forums/main/16030-adiabatic-flame-temperature.html)

Georg November 20, 2008 01:40

Adiabatic Flame Temperature
 
Hi, do you have any information about adiabatic flame temperature for mix of coal dust and excessive air? Thanks for response!

Jean van der Merwe November 28, 2008 08:35

Re: Adiabatic Flame Temperature
 
Hi You need the NCV or net calorific value for the specific coal dust you want to "burn", the composition of the coal (%carbon, moisture, sulphur and nitrogen, etc). And then the first law of thermodynamics will assist in the rest:Q +sum(mh)_reactants = sum(mh)_products. Most thermodynamic handbooks should have a section on combustion. It involves chemical balance as well from inputs above. Regards Jean


All times are GMT -4. The time now is 14:05.