CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Pump validation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 12, 2009, 03:51
Default Pump validation
  #1
Nitin Suryawanshi
Guest
 
Posts: n/a
Dear friends i did cfd analysis for centrifugal pump, and for max flow to design point(operating point) flow range cfd head is acceptable with experimental head, but for the flow below design point cfd head is decreasing & it is less for low flow rate, but theorotically head should be higher at low flow rate Can anyone please guide me resons behind this????

Thank You Nitin Suryawanshi
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Centrifugal Pump CAD Model Required for validation bhatiadinesh CFX 1 June 25, 2013 05:16
Regenerative pump modelled in FLOEFD pro YYY FloEFD, FloWorks & FloTHERM 2 October 5, 2009 06:04
pump validation Nitin Suryawanshi FLUENT 8 April 1, 2009 15:27
pump validation Nitin Suryawanshi CFX 1 January 12, 2009 08:33
Discharge pump flow Ali Main CFD Forum 0 March 5, 2003 18:11


All times are GMT -4. The time now is 11:08.