CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Channel with 2D surface mounted obstacle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 21, 1999, 10:06
Default Channel with 2D surface mounted obstacle
  #1
Francesco Marra
Guest
 
Posts: n/a
Dear all,

I am looking for (DNS/LES) simulations or experimental measurements of turbulent channel flow with a 2D surface mounted obstacle having rectangular section. I am interested in obstacle with height up to half of the channel height and Reynolds_bulk less than 8000/10000. Of course I am speaking of published references but any kind of indication will be gratefully appreciated.

Thank you in advance.

Francesco
  Reply With Quote

Old   January 5, 2000, 03:49
Default Re: Channel with 2D surface mounted obstacle
  #2
Jonas Bredberg
Guest
 
Posts: n/a
Hi,

There are a magnitude of published results for experiment and quite a few predictions with turbulence models, feel free to contact me if you need any advice or additional references. The DNS and LES are however very few, below are something that might be helpful, although not entirely what you are looking for:

author = "M. Ciofalo and M. W. Collins",

title = "Large-eddy simulation of turbulent flow and heat transfer

in a plane and rib-roughened channel",

journal = "Int. J. for Numerical methods in Fluids",

volume = 15,

pages = "453-489",

year = 1992

Re=26600

author = "D. Laurence and S. Parneix and P. Durbin",

title = "Second Momentum Closure of a DNS Backstep Flow Database",

booktitle = "2nd Int. Symposium on Turbulence, Heat and Mass Transfer",

year = 1997

with reference to the DNS-data of Le, Moin and Kim

Re=5100

author = "A. Murata and S. Mochizuki",

title = "Large Eddy Simulation Applied to Internal Forced-Convection Cooling of Gas-Turbine Blades",

booktitle = "11th IHTC",

pages = "565-570",

year = 1998

Re=4200

You should of course also check surface-mounted cube simulations, although not in my area I could send you a copy of one of my colleagues (S. Krajnovic) forthcoming thesis (in a couple of weeks) treating LES of such flows.

Best Regards

Jonas
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 6 December 1, 2020 11:12
[snappyHexMesh] Add additional boundary layers to complex stl surface tobijingles OpenFOAM Meshing & Mesh Conversion 1 October 26, 2011 10:45
Can Flow-3D plot the free surface area in Iso-surface or colour variable? therockyy FLOW-3D 1 June 20, 2010 19:36
BC for free surface in straightopen channel flow moon1234 FLUENT 0 March 15, 2010 06:50
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 06:47


All times are GMT -4. The time now is 07:29.