CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   MESH GENERATION (http://www.cfd-online.com/Forums/main/1963-mesh-generation.html)

SANJIB DAS SHARMA March 22, 2000 14:36

MESH GENERATION
 
I'm looking for a standard book on mesh generation.it should start from the very basics of the process.can anyone refer some? thanks in advance.. SANJIB

Carlos Vilela March 23, 2000 09:06

Re: MESH GENERATION
 
Hi Sanjib. You can look at these two books. There are much of numerical grid generation, structured and non-structured, elliptical, hyperbolic, interpolations methods, etc, for 2D and 3D spaces.

Good luck.

Carlos Vilela

[1] Joe. F. Thompson, "Numerical Grid Generation" [2] C. A. J. Fletcher, "Computational Technics for Fluid Dynamics", Volume I.


Hans Klaufus March 23, 2000 09:24

Re: MESH GENERATION
 
Hi Sanjib,

Why not try: Handbook of Grid Generation by Joe F. Thompson (Editor), B. K. Soni (Editor), N. P. Weatherill (Editor), Nigel P. Weatherrill

Although this book is not as suitable for beginners compared to some other books, it discusses many aspects of grid generation in 1200(!!) pages.

Hans.


Pawel Kosinski March 23, 2000 14:14

Re: MESH GENERATION
 
Dear Sanjib,

Try to look at this Internet site: http://www.erc.msstate.edu/education/gridbook/

Good luck in your research,

Pawel Kosinski


SANJIB DAS SHARMA March 24, 2000 02:03

Re: MESH GENERATION
 
DEAR FRIENDS thanks for the references.i'll definitely look for those. SANJIB

Jeremy Shipman March 28, 2000 13:37

Re: MESH GENERATION
 
If you want to look up grid generation resources on the www, here is a great site:

www-users.informatik.rwth-aachen.de/~roberts/meshgeneration.html

Marcio Arędes Martins March 30, 2000 00:05

Re: MESH GENERATION
 
Dear Sanjib

You could look [George, P.L., "Automatic Mesh Generation", John Willey & Sons, 1st Edition, Masson, Paris, 1991]. This book present all the fundamental technics for structured and unstructured meshes.

Good luck and welcome to the mesh generation science!

Nima AmaniFard May 13, 2000 07:16

Re: MESH GENERATION
 
i am preparing a solver for a stage of axial compressor to solve the Navier-Stockes equations.would you please guid me about the softwares or some available new methods on mesh generation od cascade with 8 to 10 baldes in each row?

best regards niam


All times are GMT -4. The time now is 04:52.