CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Tip Clearance in Transonic Compressors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 2, 2000, 09:23
Default Tip Clearance in Transonic Compressors
  #1
Behnam.H.Beheshti
Guest
 
Posts: n/a
Hi everybody,

I am a PH.D student and I am going to start my thesis which is about studing flow field in the tip clearance of a transonic compressor. I would be so grateful if you tell me how I can start and if you introduce me some helpful references .

sincerely yours,

Behnam.H.Beheshti Sharif University of Technology
  Reply With Quote

Old   May 2, 2000, 10:16
Default Re: Tip Clearance in Transonic Compressors
  #2
John C. Chien
Guest
 
Posts: n/a
(1). Try to read the ASME/ Journal of Turbomachinery. And ASME turbomachinery conference papers.
  Reply With Quote

Old   May 2, 2000, 15:56
Default Re: Tip Clearance in Transonic Compressors
  #3
clifford bradford
Guest
 
Posts: n/a
try Budugur lakshminarayana's book on turbomachinery "fluid dynamics and heat transfer of turbomachinery" it's a good reference on anything to do with turbomachines. john also pointed you to some good reference journals. increasing papers are available online either in collections or at the authors homepage eg http://web.mit.edu/aeroastro/www/labs/GTL/ is mit's gas turbine lab homepage
  Reply With Quote

Old   May 3, 2000, 03:37
Default Re: Tip Clearance in Transonic Compressors
  #4
Joergw Weidenfeller
Guest
 
Posts: n/a
Look for the book: Compressor Aerodynamics by. N. A. Cumpsty. There are also a lot of references.
  Reply With Quote

Old   September 16, 2010, 16:16
Default question
  #5
New Member
 
N.Re.
Join Date: Aug 2010
Posts: 9
Rep Power: 6
annie is on a distinguished road
I read the Nasa report "Laser Anemometer Measurements in a Transonic Axial Flow Fan Rotor" that is about NASA rotor 67 and it has a lot of data about the 3D geometry about this blade,and I tried to produce the 3D geometry of this blade that I need it immediately but I couldn't. Does any body have the 3D geometry of this blade in IGES or STEP format?
Thanks

Last edited by annie; September 19, 2010 at 11:32.
annie is offline   Reply With Quote

Old   September 17, 2010, 18:50
Thumbs down
  #6
Far
Super Moderator
 
Far's Avatar
 
Sijal Ahmed Memon (turboenginner@gmail.com)
Join Date: Mar 2009
Location: Islamabad Pakistan
Posts: 3,916
Blog Entries: 6
Rep Power: 38
Far will become famous soon enoughFar will become famous soon enough
Send a message via Skype™ to Far
you have couple of papers on compressor , I am not getting your point?
Far is offline   Reply With Quote

Old   September 18, 2010, 01:52
Default
  #7
New Member
 
N.Re.
Join Date: Aug 2010
Posts: 9
Rep Power: 6
annie is on a distinguished road
Quote:
Originally Posted by Far View Post
you have couple of papers on compressor , I am not getting your point?
Does any body have the 3D geometry of this blade in IGES or STEP format?
Thanks

Last edited by annie; September 19, 2010 at 11:34.
annie is offline   Reply With Quote

Old   May 20, 2013, 21:47
Default
  #8
New Member
 
Liuwei
Join Date: Nov 2012
Posts: 2
Rep Power: 0
bigbigbird is on a distinguished road
Quote:
Originally Posted by Joergw Weidenfeller
;8581
Look for the book: Compressor Aerodynamics by. N. A. Cumpsty. There are also a lot of references.
Do you have an e-book of Compressor Aerodynamics by .N.A.Cumpsty.If you have please send one to me.My e-mail was:jixiexueyuanliuwei@163.com
thank you very much.
bigbigbird is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Turbine blade with filleting and tip clearance Pursuor ANSYS Meshing & Geometry 4 July 7, 2010 13:56
Meshing in tip clearance. me CD-adapco 0 August 25, 2008 03:20
Tip Clearance Liam CFX 3 September 7, 2005 05:30
Tip clearance pressure distribution Karthik FLUENT 1 August 27, 2004 10:12
Tip Clearance Drona CFX 0 October 17, 2002 05:25


All times are GMT -4. The time now is 03:27.