CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Role of Boundary Pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 25, 2000, 14:10
Default Re: Role of Boundary Pressure
  #1
Jim Park
Guest
 
Posts: n/a
Are you modeling a compressible flow or an incompressible flow?

What are the velocity boundary conditions you wish to impose?
  Reply With Quote

Old   May 25, 2000, 02:17
Default Role of Boundary Pressure
  #2
Abhijit Tilak
Guest
 
Posts: n/a
hi everybody,

I have some fundamental doubt about the excat role of boundary pressure. My first question is should i use the boundary pressure i have obtained by p' equation in momentum equation. The boundary pressure is obtained by interpolating from interior nodes. What i have observed that such interpolation leads to spurious source of mass. There also seems to be some sensitivity to grid spacing of first two nodes from the boundary. I have tried using cubic interpolation for boundary pressure, but it does'nt help. Shah and London have proposed a correlation of extracting boundary pressure, but that's for some special cases. I am using non-staggered grid. My main question is what is the excat role of boundary pressure and how effectively can i use it. thnx abhijit tilak
  Reply With Quote

Old   May 29, 2000, 02:13
Default Re: Role of Boundary Pressure
  #3
Abhijit Tilak
Guest
 
Posts: n/a
hi jim.

i am solving usual driven cavity flow with three impenetrable walls and one moving. the flow is ofcourse incompressible.and the grid is non-uniform.so boundary condition is u=0 and v=0 at the walls.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure boundary condition C-H Kuo Main CFD Forum 18 September 16, 2016 04:19
stagnation pressure boundary problem mbgnfrx2 STAR-CD 2 November 26, 2012 00:55
Boundary Conditions : Total Pressure or Velocity Gearb0x OpenFOAM Running, Solving & CFD 2 February 28, 2011 22:18
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 23:02
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) HB &DS CFX 0 January 9, 2000 14:19


All times are GMT -4. The time now is 04:33.