CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Roe average

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 11, 2000, 10:24
Default Roe average
  #1
Andrea Panizza
Guest
 
Posts: n/a
I am currently studying the approximate linear solver of Roe for the Riemann problem. I have formulae for Roe's averaged density, velocity and total enthalpy, but, as my flux Jacobians are written in terms of conservative variables, I need formulae for Roe's averaged mass flux and for total energy times density. As for the first one, I obviuously obtain R[rho*u]=R[rho] * R[u] ( R[ ] means Roe's average). What for R[E]? Do I use the same scheme used for u and H, thus obtaining R[E]=(E1*sqrt(rho1)+E2*sqrt(rho2))/ (sqrt(rho1)+sqrt(rho2)) ?

Thanks in advance, Andrea
  Reply With Quote

Old   June 11, 2000, 14:00
Default Re: Roe average
  #2
Bernard Parent
Guest
 
Posts: n/a
Knowing H, rho and u, you have enough variables to determine all your unknowns. Just find the primitive variables from the latter three averaged properties and obtain E from the primitives..

You can check the exactness of your Roe average by multiplying the Roe averaged A and (F_R-F_L) and comparing the so-obtained flux to (Q_R-Q_L). They should match exactly.

-bernard
  Reply With Quote

Old   June 13, 2000, 15:19
Default Re: Roe average
  #3
Andrea Panizza
Guest
 
Posts: n/a
Thanks for your interest in my question. I did not answer immediately because I wanted to try your suggestion first. Anyway, I did not obtain convergence even in this way, so I wuold like to ask you some questions: I understand A is the flux Jacobian, but which are F_R and F_L? Maybe they the solution vector in the cell on the right and in the cell on the left, aren' t they? And which are Q_R and Q_L? Lastly, as Roe's average ( harmonic average ) is nonlinear, I should not obtain the same result using your method and mine. Could you indicate me some references where the question is discussed in detail?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Floating point exception error Alan OpenFOAM Running, Solving & CFD 11 July 1, 2021 22:51
Average Facet, Surface Vertex or Area-Weighted Emmanuel FLUENT 3 March 27, 2020 11:55
roe solver with entropy fix mehdi Main CFD Forum 1 February 26, 2006 06:36
Roe average cfd student Main CFD Forum 0 February 16, 2004 01:22
Roe States (average) in curvilinear coordinates? Bernard Parent Main CFD Forum 3 February 29, 2000 12:02


All times are GMT -4. The time now is 08:07.