CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   ventilation modeling (http://www.cfd-online.com/Forums/main/2307-ventilation-modeling.html)

alex June 28, 2000 16:10

ventilation modeling
 
Hello,

I plan to model ventilation in a fume hood enclosure (reasonably simple box-like geometry). Will need to solve incompressible NS and potentially would like to compare different turbulence (0-eq., k-eps (regular, low Re, variations), LES) to an experiment for a given configuration. Could anyone recommend a public-domain 2D/3D code with some grid generation (2D/3D) capabilities. Thank you.

John C. Chien June 28, 2000 19:46

Re: ventilation modeling
 
(1). It is more or less like a post-doctoral project. (2). I am not sure whether there is a free code to solve the problem or not. (3). But I think, you could try to use the current general purpose commercial codes. (4). At least, they should be able to cover the geometry and the mesh, to some extent. (5). I have modelled this types of problem before, using my own 3-D code and commercial codes. (6). The real problem is fairly complicated. So, in most cases, the geometry, the physics both must be simplified, including the boundary conditions.


All times are GMT -4. The time now is 19:04.