CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Solving 2-d problems by 3-d solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 7, 2000, 06:12
Default Solving 2-d problems by 3-d solver
  #1
eddy
Guest
 
Posts: n/a
Can we solve 2-d CFD problems by using 3-d CFD codes with periodical boundary condition in third direction?
  Reply With Quote

Old   September 7, 2000, 06:40
Default Re: Solving 2-d problems by 3-d solver
  #2
Zhengtong Xie
Guest
 
Posts: n/a
As my experience(use a 3-d code to envaluate the lift of 2-d aerofoil), I let the length of computaion domain in the third direction to be much biger than the other two directions, then I averaged the third direction. It is expensive but maybe much reliable.
  Reply With Quote

Old   September 7, 2000, 07:01
Default Re: Solving 2-d problems by 3-d solver
  #3
D.M. Lipinski
Guest
 
Posts: n/a
You should use symmetry conditions (zero normal derivatives) in the third direction and not the periodic bounday conditions. The third velocity component should be set to zero (Dirichlet condition).

regards

DML
  Reply With Quote

Old   September 7, 2000, 07:15
Default Re: Solving 2-d problems by 3-d solver
  #4
Dietmar Giebert
Guest
 
Posts: n/a
If there is a real 2D configuration you can solve the problem with a 3D-code by setting symmetry boundary conditions at the surfaces in the third direction. Periodic boundary conditions are not really appropriate because this kind of BC does not imply zero mass flux over these surfaces.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
icoLagrangianFoam OF1.6 myNewParticleSolver heavy_user OpenFOAM 23 June 2, 2020 03:18
Velocity blows up suddenly after 30,000+ iterations lordvon OpenFOAM Running, Solving & CFD 15 October 19, 2015 14:52
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33
MRFSimpleFOAM goes divergenced! renyun0511 OpenFOAM Running, Solving & CFD 0 November 19, 2009 03:11
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 03:58


All times are GMT -4. The time now is 16:51.