CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

boundary layer upon viscous wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 15, 2000, 07:01
Default boundary layer upon viscous wall
  #1
Xavier TRICOT
Guest
 
Posts: n/a
Hi,

I want to modelize a gas flow around walls witch are viscous like fish skin per example.

So I'm looking for some informations about speed profiles in boundary layer, or turbulence treatment near this type of wall (near wall law, log law, ...).

Please can you help me by giving me informations, references or bibliography, or name of people to contact ?

Thanks.
  Reply With Quote

Old   September 19, 2000, 02:09
Default Re: boundary layer upon viscous wall
  #2
jeyamani
Guest
 
Posts: n/a
Xavier

can you explain more in detail,if you consider fish like skin as wall,then it comes under topic of " Boundary layer thoery in complaint surfaces or walls".Complaint surface consists of springs & dampers,for example like Dolphin skin. i have gone through this topics in Hydrodynamic stability.if want any journels on this ,i will mail you after one or two days.

  Reply With Quote

Old   September 20, 2000, 04:40
Default Re: boundary layer upon viscous wall
  #3
Xavier TRICOT
Guest
 
Posts: n/a
Yes, that's it.

I would like to know :

1/ speed profiles in the boundary layer near a VISCOUS WALL

2/ if there is some wall functions for that, relative to k-epsilon turbulence treatment in boundary layer

I call "VISCOUS WALL" any wall where there is a viscous fluid on it. Per example : there is mucus on the wall inside people noze. How can I modelize boundary layer in this case ?

There is also a mucus on the skin of fishes.

You're right, walls like this also consist on an alternance of springs & dampers.

So any information upon the two subjects (mucus and springs & dampers) will be very helpfull for me.

Bye, Xavier

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 06:49
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 20:30
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15
Please help with flow around car modelling! Tudor Miron CFX 17 March 19, 2004 19:23
Wall turbulence, viscosity, boundary layer Patrick Godon Main CFD Forum 1 November 5, 2003 15:39


All times are GMT -4. The time now is 19:56.