CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

QUESTION IN GENERATION OF BODY-FITTED MESH

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 19, 2000, 04:06
Default QUESTION IN GENERATION OF BODY-FITTED MESH
  #1
James Zhu
Guest
 
Posts: n/a
When programming a code in generation of body-fitted mesh for a cirque using the Laplace equation,I met a problem: the first,the outputted x and y coordinates are wrong,clearly,the point almost all locate in the secant,especially in the two endpoints(the secant coinsidence with the x-axis) the second,I use multigrid method to solve the system of elliptical equation with the FMG+FAS,5 mesh level are used,on the forth 4 level from the coarsest grid(5) to the finer grid(2),the V-cycle converge very fast,but in the finest grid,the V-cycle converge in the beginning,but donot converge finally(the residual from the Gauss-Seidel iteration is 1.6...,too big),please help me!

thank you!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 39 June 5, 2013 19:02
HOW TO GIVE BODY HEAT GENERATION TERM NITUL KALITA FLUENT 3 December 18, 2008 12:23
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 15:03.