CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

KIVA2

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 31, 2000, 05:28
Default KIVA2
  #1
hush
Guest
 
Posts: n/a
Dear CFD folks,

I'm a new KIVA user. I have KIVA 2, and ITAPE also. Now, I'm in a trouble. I ran the code with the ITAPE and looked at some results with Tecplot. But, I found something wrong in the solution. Velocity and other scalar quatities didn't look coupled together. Velocity contours were looking good(?) themselves. but, density, temperature, pressures etc. seem to be solved only in j=1 as if I set the problem using sector mesh option(Mesh is 360deg.). I checked the input data(CYL, JSECTR, etc), but I found nothing wrong. I think someone touched somewhere in the source code I have.

So I'd like to run other problems to check if my code has been changed or not.

If anyone can send me ITAPE or OUTPUT, CLEAN KIVA 2 SOURCE CODE, that'll be very helpful to me.

thanks

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 07:55.