CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Help! about verifying elements.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 11, 2000, 05:29
Default Help! about verifying elements.
  #1
Archawa
Guest
 
Posts: n/a
Could anyone please help me on this problem.

I have to verify the convergence condition of some CFD elements, and I need the information about Babuska-Brezzi condition. But I have no idea where to find.

If anyone know where to get the information about Babuska-Brezzi condition, patch test, or other clues to verify the element, you help would be much appreciate.

Thank for your attention.
  Reply With Quote

Old   December 14, 2000, 13:06
Default Re: Help! about verifying elements.
  #2
Ghanshyam Singh
Guest
 
Posts: n/a
I think you must read "Finite Element Procedures" by "Klaus-Jurgen Bathe"

GS
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Hybrid mesh for 2D boundary layer Bigio ANSYS Meshing & Geometry 33 November 18, 2019 10:15
[ICEM] Mesh along axis for a wedge gives elements with extreme aspect ratio sangrampp ANSYS Meshing & Geometry 0 November 17, 2010 07:57
[ICEM] Negative Volumes & 7 node HEXA elements mr_stoked ANSYS Meshing & Geometry 1 September 21, 2010 13:45
Penetrating elements in extruded mesh Michael P CFX 2 May 20, 2005 09:06
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 11:10.