CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 29, 2001, 11:26
Default Gambit
  #1
CHRIS
Guest
 
Posts: n/a
Hi I recently finished some work on channel flow, creating the geometry, mesh and boundary conditions using gambit and then exporting the mesh to run into Fluent. Now i have to do the same for a pipe flow but i'm abit confused in creating the geometry for the pipe. I'm getting three faces for the inlet and outlet and the whole pipe as the third face. What i really want to do is to specify the walls and consider the axisymmetry as i didn't for the channel in the boundary layer setting. Can i achieve that?

i would like your help.

Chris.
  Reply With Quote

Old   January 29, 2001, 11:27
Default Re: Gambit
  #2
CHRIS
Guest
 
Posts: n/a
  Reply With Quote

Old   January 29, 2001, 13:08
Default There is a Fluent Forum created for you ,NOT HERE
  #3
John C. Chien
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Does Gambit has a maximum allowable grid number? spartan1516 ANSYS Meshing & Geometry 7 March 25, 2010 10:08
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
between IDL Gambit and rhino, any help? philip FLUENT 0 June 23, 2005 12:08


All times are GMT -4. The time now is 13:54.