CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Free surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 4, 2001, 23:53
Default Free surface
  #1
Need Advice
Guest
 
Posts: n/a
Sorry i cannot seem to access the old threads as such i have to post again. I am currently looking into heat convection flow problem which involves energy transport equation. Right now, i am unsure of my vorticity, streamfunction as well as temperature plots. My problem is non dimensionalised. With a left wall temp at 1, right wall temp at 0, top wall :temp=0.5, vorticity =0, bottom wall insulated. Am currently using a mesh size of 120 by 40 with the length:width ratio at 20:1. Is this sufficient and wat sort of plots do i expect? Please advice, thanx!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Free surface is below than expected..results are not good mechovator CFX 24 April 8, 2011 01:41
Submarine Free Surface samwh CFX 7 August 30, 2009 08:14
Multiphase flow. Dispersed and free surface model Luis CFX 8 May 29, 2007 19:13
Equilibrium of a free surface under surface tensio Ryan Main CFD Forum 1 August 7, 2001 17:14
Modeling Free Surface Flows Elliot Schwartz Main CFD Forum 5 August 25, 1998 22:03


All times are GMT -4. The time now is 00:05.