CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

convection Hight Rayleigh Number

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 15, 2001, 10:44
Default convection Hight Rayleigh Number
  #1
mehdi
Guest
 
Posts: n/a
Dear all, I find difficulty in the resolution of the Navier stokes equations at high Rayleigh number (more than 1e6). The physical problem is about natural convection in rectangular shaped enclosure. I use a control volume based finite element method for obtaining the algebraic discretisation equations. I would like to know witch is the appropriate dimensionelless grouped to be the better, and how can trait this kind of problems. You can answer in French if you want
  Reply With Quote

Old   March 15, 2001, 11:20
Default Re: convection Hight Rayleigh Number
  #2
Sebastien Perron
Guest
 
Posts: n/a
Les difficultés ne sont aucunement liées à la combinaison de nombres sans dimension qui est utilisée. Pour un tel nombre de Rayleigh, il extrèmement difficile d'obtenir une solution avec une résolution couplée du système. En effet, la solution pour la vélocité est intimement liée à celle de la température. Il est préférable d'utiliser de la relaxation: découplé le système et un faux pas de temps (résoudre l'écoulement en transitoire bien qu'il soit permanent).

Vous pouvez tenter une résolution avec ces paramètres: cavitée unitaire, maillage 40x40, dt=0.001, rho=1, mu=0.71, k=1, cp=1, g= -10, Beta =71000 (Ra=1.e+6, Pr=0.71). Dans mon cas, je n'ai aucune difficulté à résoudre ce problème avec ces paramètres.

1) Quelles sont vos fonctions d'interpolation? 2) Quelle type de discrétisation du terme convectif utilisez-vous?

Bonne chance.
  Reply With Quote

Old   March 15, 2001, 12:55
Default Re: convection Hight Rayleigh Number
  #3
George Bergantz
Guest
 
Posts: n/a
I don't read French, and so have no idea what good advice Sebatian may have provided.

Recall that there are two important dimensionless groups in 'standard' natural convection: the Rayleigh number and the Prandtl number. What are you using? You can have hi-Rayleigh number convection at very low Reynolds number for example in some applications in earth sciences.

Also be aware that as Rayleigh number increases, there may be no steady solution as boundary-layer instabilities create time choatic flow even at low Reynolds number.

Perhaps provide more information please. How are you dealing with the pressure in this enclosure flow?
  Reply With Quote

Old   March 16, 2001, 07:21
Default Re: convection Hight Rayleigh Number
  #4
mehdi
Guest
 
Posts: n/a
Dear George, What Mr Sebastien said is: From him the difficulty is not caused bye the dimensionless parameters and is not easy to obtain solution with coupled equations (velocity and temperature) and relaxation should be taken. He suggested that the problem must be considered as stationary with constant time step. He gave some parameters that he has used for this problem at Ra=1e6 and he asked me witch interpolation function and type oh the discretization of the advection term I have used.

To obtain the non dimensionel form of the conservation eqautions , I have used the Rayleigh and the Prandtl parameters in the same time, but not the Reynoldes. ( I think that the Reynolds number is applicable in mixed convection). In the literature we can find resultes at Ra=1e7 without instability??. I think that the problem is of numerical order. In the coupling velocity-pressure I use the SIMPLER algorithm.
  Reply With Quote

Old   March 16, 2001, 07:36
Default Re: convection Hight Rayleigh Number +Simpler
  #5
Sebastien Perron
Guest
 
Posts: n/a
I once used the simpler algorithm to solve this kind of flow. In order to get a solution, I had to use a small time step (dt < 0.001). The relaxation was not enough.

By the way, when you use the simpler algorithm to solve an incompresible, the equations are un-coupled (mass and momentum are not solve at the same time)

The parameters I gave you are for Pr=0.71 and Ra=10e6

(Sorry, If I have interfered in George thread....)
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 09:54
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 05:03
High Rayleigh Number natural convection fly829 FLUENT 3 June 7, 2011 11:41
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43


All times are GMT -4. The time now is 12:51.